74 Operations Manual
–
Wall Extruder (Frame Nailer Gen IV and Tables)
Has been advised to be conscious of the number of frames on the outfeed rollers
SAFEKEEPING PRACTICES
Checked
Has been advised only the operator is permitted within the workspace while machine is
operating
Has been advised to keep hands and body parts well clear of clamps while operating
Has been advised to keep hands and body parts well clear of guns while operating
Main supply of air and electricity to be off before commencing any routine maintenance
Air pressure to be drained before routine maintenance
Advised to keep working area clean and clear of trip and slip hazards
Shown where to access and clean off-cut, waste and dust build up points
Check any electrical leads to the machine regularly for deterioration
Ensure working area has adequate lighting
Has been advised on minimum PPE requirements for machine operation
Has been advised to report machinery defects as soon as noticed
Shown heavy waste build up areas
Advised on correct cleaning and repair procedures
Shown danger and warning decals
Has been advised to use safe work practices while lifting timber and framing components
VERIFICATION:
Training officer to fill in this section
Training Officer
Name:
Signature:
Date:
I the undersigned declare that I have been shown and instructed in the all of the above listed
matters.
I declare that all the information in this document was shown and demonstrated to me by the
instructor.
I further declare that I have read and understand the Operation and Maintenance Manual
Operator
Name:
Signature:
Date:
Witnessed by
Name:
Signature:
Date:
A copy of this document is to be kept in each employee file on site.
