19 Operations Manual
–
Wall Extruder (Frame Nailer Gen IV and Tables)
7.6
Recommendations
That the operator is trained, on induction, of the dangers of accessing the machine operating area.
The electrical system is to be serviced by a qualified electrician only.
That all operators are walked through the operators’ manual
, and all potential hazards are
identified.
That good housekeeping is maintained at all times to avoid the risk of slips, trips or falls.
That approved eye and hearing protection is used at all times when operating the machine.
That approved dust masks and safety footwear are worn at all times when operating the machine.
That if the machine is not operating as efficiently as specified, the operator notify their supervisor;
who in turn takes appropriate action and eliminates the problem if possible.
All guards and safety devices are not to be removed.
It is recommended that a visual exclusion zone be marked on the floor on a one metre (1000mm)
perimeter surrounding the working area of the machine; to identify the work space to pedestrians.
WARNING!
This machine must only be operated by personnel who have been
properly instructed in all aspects of the machine’s safe operation. They must also
be wearing the recommended protective clothing and have thoroughly read and
understood this operation and service manual.
