Spellman X3645, Instruction Manual

Page: 7 / 40

DF/FF MANUAL 118002-001 R
ev B
set-up instructions. With few
exceptions, these options can be
retrofitted to your power supply at the
factory in a short time. For price and
retrofit arrangements, contact the
Spellman Sales Department.
1.4 INTERPRETING THE
MODEL NUMBER
The model number of the power supply
describes its capabilities. After the series
name is:
DF 60 N 4 / HS / X(#)
Series
Name
Voltage
Maximum
Polarity Option
"X" Number
Custom
Power
Maximum
OPTION CODE OPTION
3 PH
208Vac, ± 10%, 3 phase, 50/60Hz input
HS 20ppm Temperature Coefficient (voltage and current)
FSI (220V) Remote Fail-Safe circuit operating at 220Vac (replaces WFS
220V standard circuit)
FSI (12VDC) Remote Fail-Safe circuit operating at 12Vdc (24Vdc standard)
WFS (24V/PO) 24Vdc water flow signal switched with power ON (switched
with X-Ray ON is standard)
WFS (220V/PO) 220V ac water flow signal switch with power ON (switched
with X-Ray ON standard) *Not available with FSI (220V)
DFS Dual Filament supply (DF/FF-F Only)
JP 180Vac/220Vac 60kV/150mA/4kW maximum output power
ETM Elapsed time meter – displays cumulative hours of X-Ray ON
(in micro)
LC LC jumped together on X-Ray output connector (LS jumped is
standard)
SL Mounting Slides
SS(X) Non-standard slow start (this should go out)
Table 1.1