Figure 20 – TCP/IP Properties
4.2.3.2
Testing a Direct Connection
You can use the program “Ping” to test a network connection
between the computer and the SLM. “Ping” is a command line tool
so we will need to bring up a command prompt. Under Windows
NT, 2000 and XP the name of this command is “CMD”. Under
Windows 98 the name of this command is “Command”.
To do this, click on Start->Run->Cmd
Then on the command line type
Ping <IP Address>
For example
Ping 192.168.1.4
If the SLM is found at the specified IP address, the Ping command
will respond with a report that is similar to:
Pinging 192.168.1.4 with 32 bytes of data:
118080-001 REV A
Page 24 of 95
Summary of Contents for SLM SERIES
