5.5.24 Request User Configs
Description:
The host requests that the firmware report the User Configs.
Direction:
Host to supply
Syntax:
<STX><27><,><ETX>
Example:
<STX>27,<ETX>
Response:
<STX><27><,><ARG1><,><ARG2><,><ARG3><,><ARG4><,><ARG5><,
><ARG6><,><ARG7><,><ARG8><,><ARG9><,><ETX>
Where:
<ARG1> = 1 = ROV enabled, 0 = ROV disabled in ASCII format.
<ARG2> = 0-110 in ASCII format representing the overvoltage
percentage.
<ARG3> = 1-600 in ASCII format representing the ramp rate in seconds
from .1 to 60sec.
<ARG4> = 1 = AOL enabled, 0 = AOL disabled in ASCII format.value.
<ARG5> = 0-20 in ASCII format representing the arc count.
<ARG6> = 0-60 in ASCII format representing the arc period in seconds.
<ARG7> = 0-500 in ASCII format representing the arc quench time in milli-
seconds.
<ARG8> = 1 = ARC re-ramp enabled, 0 = ARC re-ramp disabled in
ASCII format.
<ARG9> = 1 = No Arc detect, 0 = Arc detect in ASCII format.
Example:
<STX>27,1,50,100,0,10,30,250,1,0,<ETX>
118080-001 REV A
Page 63 of 95
Summary of Contents for SLM SERIES
