Speed Touch 580, Cli Reference Manual

Page: 452 / 676

Label Commands
E-DOC-CTC-20050531-0057 v1.0
432
label modify
Modify a label configuration.
SYNTAX:
where:
label modify name = <string>
[classification = <{ignore | overwrite | increase}>]
[defclass = <number{0-15} | dscp | default>]
[ackclass = <number{0-15} | defclass | prioritize>]
[bidirectional = <{disabled | enabled}>]
[inheritance = <{disabled | enabled}>]
[tosmarking = <{disabled | enabled}>]
[tos = <number{0-255}>]
[dscp = <{DSCP name> | <number>}]
[precedence = <{IP precedence type> | <number>}]
[ttloverwrite = <{disabled | enabled}>]
[ttl = <number{0-255}>]
[trace = <{disabled | enabled}>]
name The name of the label to be configured. REQUIRED
classification Select the method of classification, in other words, determine what the Layer 3
class assignment must do with the priority of the data packet (as set by Layer 2).
Choose between:
ignore : Ignore the class parameters defclass and ackclass , but use the class
as set by Layer 2 (VLAN user priority, ATM QoS).
overwrite : Change the class to defclass and ackclass , overwriting the value
set by Layer 2 (VLAN user priority, ATM QoS).
increase : Change the class according to defclass and ackclass , but only if the
defclass value is higher than the class value already set by Layer 2.
The default is ignore .
Note
The class as set by Layer 2 is derived from:
the VLAN user priority (in case of VLAN or priority tagged frames)
the ATM PVC QoS class (in case the packet is received from an
ATM PVC).
For non-VLAN frames or non-PVC received data, Layer 2 sets the
internal class (priority) to
4 by default.
OPTIONAL
defclass The default priority class of the assigned connection.
Choose between:
A number between 0 and 15
dscp
default.
The default is 0 .
OPTIONAL
ackclass The priority class of the ACK segments of the TCP connection.
Choose between:
A number between 0 and 15
prioritize
defclass.
The default is 0 .
OPTIONAL