Speed Touch 580, Cli Reference Manual

Page: 416 / 676

IP Commands
E-DOC-CTC-20050531-0057 v1.0
396
ip rtadd
Add a route to the routing table.
SYNTAX:
where:
EXAMPLE:
RELATED COMMANDS:
ip rtadd dst = <ip-address>
[dstmsk = <ip-mask(dotted or cidr)>]
[label = <string>]
[gateway = <ip-address>]
[intf = <string>]
[srcintf = <string>]
[metric = <number{0-100}>]
dst The destination IP address(es) for this route.
Note
Supports ip/mask notation.
REQUIRED
dstmsk The destination IP address mask. OPTIONAL
label The name of the label. OPTIONAL
gateway The IP address of the next hop. This hop must be directly connected.
Note
The parameters gateway and intf are mutually exclusive.
OPTIONAL
intf Only for special interface routes: the outgoing IP interface name.
Note
The parameters gateway and intf are mutually exclusive.
OPTIONAL
srcintf Use this interface for source address selection. OPTIONAL
metric The metric for this route (weight factor).
The lower the metric, the higher the weight.
The default is
0 .
OPTIONAL
=>ip rtlist
Destination Label Gateway Intf Mtrc Status
10.0.0.0/24 10.0.0.140 eth0 0 [UP]
10.0.0.140/32 10.0.0.140 eth0 0 [UP]
127.0.0.1/32 127.0.0.1 loop 0 [UP]
=>ip rtadd dst=10.10.0.0/24 label=Interactive gateway=10.0.0.140
=>ip rtlist
Destination Label Gateway Intf Mtrc Status
10.0.0.0/24 10.0.0.140 eth0 0 [UP]
10.10.0.0/24 Interactive 10.0.0.140 eth0 0 [UP]
10.0.0.140/32 10.0.0.140 eth0 0 [UP]
127.0.0.1/32 127.0.0.1 loop 0 [UP]
=>
ip rtdelete Delete a route from the routing table.
ip rtlist Display the routing table.