manualshive.com logo in svg

Speed Touch 580, Cli Reference Manual

Share
Download
Speed Touch 580 Cli Reference Manual Download Page 34

ATM Commands

E-DOC-CTC-20050531-0057 v1.0

14

atm ifconfig

Configure an ATM interface.

SYNTAX:

where:

The interface to be configured must not be connected at the time of configuration. If this should be the 
case, use the command 

:atm ifdetach

 before using the command 

:atm ifconfig

.

atm ifconfig

intf = <string>

[dest = <string>]

[qos = <string>]

[encaps = <{llc | vcmux}>]

[retry = <number{0-65535}>]

[fcs = <{disabled | enabled | auto}>]

[ulp = <{ip | mac | ppp}>]

intf

The name of the ATM interface to be configured.

REQUIRED

dest

The WAN destination for this ATM interface.
Typically, an ATM phonebook entry.

OPTIONAL

qos

The name of the Quality of Service (QoS) book entry to apply on this ATM interface.
The default is 

default

.

OPTIONAL

encaps

The type of encapsulation to be used for this ATM interface.
Choose between:

llc

: Logical Link Control (LLC) / Sub Network Access Protocol (SNAP)

vcmux

: Virtual Channel MUltipleXing (VCMUX).

The default is 

llc

.

OPTIONAL

fcs

Enable or disable the inclusion of the Ethernet Frame Check Sequence (FCS) in the 
packet header on the WAN side (only used for llc encapsulation for mac).
The default is 

disabled

.

Note

This parameter is normally left disabled.

OPTIONAL

retry

A number between 0 and 65535.
Represents the number of times the SpeedTouch™ retries to set up a WAN connection 
before giving up.
The default is 

10

.

OPTIONAL

ulp

Select the Upper Layer Protocol (ULP) for this interface.
Choose between:

ip

 (for a Routed IPoA interface).

mac

 (for a Bridged Ethernet, Routed ETHoA, Bridged PPP over Ethernet (PPPoE), 

Routed PPPoE or a  PPPoE Relay interface).

ppp

 (for a Routed PPP over ATM (PPPoA) interface).

The default is 

ip

.

OPTIONAL

Summary of Contents for 580





































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands