Speed Touch 580 Cli Reference Manual Download Page 616

Page: 616 / 676

Wireless Commands

E-DOC-CTC-20050531-0057 v1.0

596

wireless ifconfig

Configure the wireless settings.

SYNTAX:

where:

wireless ifconfig

[state = <{enabled | disabled}>]

[channel = <{auto | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10

| 11 | 12 | 13}>]

[ssid = <quoted string>]

[any = <{disabled | enabled}>]

[interop = <{802.11b | 802.11b/g | 802.11g}>]

[frameburst = <{disabled | enabled}>]

state

Enable or disable the interface operational status of wireless access point.
The default is

enabled

OPTIONAL

channel

The communication channel number.
Choose between:

auto

: the best communication channel is automatically selected by the

SpeedTouch™ (recommended setting).

a number between 1 and 14.

Note

Depending on local regulations, the number of channels actually
allowed to be used, may be restricted.

The default is

auto

OPTIONAL

ssid

The network name, also known as Service Set ID (SSID).

OPTIONAL

any

Make the SSID public or not.
Choose between:

enabled

: the SpeedTouch™ broadcasts its SSID and accepts every client.

disabled

: the SpeedTouch™ does not broadcast its SSID and accepts only

those clients who have the correct SSID.

The default is

enabled

OPTIONAL

interop

Select the interoperability mode.
Choose between:

802.11b

: only IEEE 802.11b clients can connect to the SpeedTouch™.

802.11b/g

: IEEE 802.11g and b clients can connect to the SpeedTouch™.

Note

When a IEEE 802.11b client connects to the SpeedTouch™, the
modulation rate drops to 11Mbps for this client.

802.11g

: only IEEE 802.11g clients can connect to the SpeedTouch™.

The default is

802.11b/g

OPTIONAL

frameburst

Enable or disable framebursting.
The default is

disabled

OPTIONAL

Summary of Contents for 580




































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 580

Reviews:

Related manuals for 580

Brands by name

Popular brands

Speed Touch 580, Cli Reference Manual

Search results

Summary of Contents for 580

Reviews:

Related manuals for 580

Brands by name

Popular brands