manualshive.com logo in svg

Speed Touch 580, Cli Reference Manual

Share
Download
Speed Touch 580 Cli Reference Manual Download Page 505

PPP Commands

E-DOC-CTC-20050531-0057 v1.0

485

PPP Commands

Introduction

This chapter describes the commands of the 

ppp

 command group.

Contents

This chapter covers the following commands:

ppp flush 

Flush all PPP interfaces.

486

ppp ifadd 

Create a new PPP interface.

487

ppp ifattach 

Attach a PPP interface.

488

ppp ifconfig 

Configure a PPP interface.

489

ppp ifdelete 

Delete a PPP interface.

493

ppp ifdetach 

Detach a PPP interface.

494

ppp iflist 

Display the PPP interfaces.

495

ppp ifscan 

Scan a PPPoE interface for available Access Concentrator and Service names.

496

ppp rtadd 

Add a route to the routing table when the PPP link comes up.

497

ppp rtdelete 

Delete the route for a PPP link.

499

ppp relay flush 

Remove all Ethernet interfaces from the PPP relay agent list and terminate all 
sessions.

500

ppp relay ifadd 

Add an Ethernet interface to the PPP relay list.

501

ppp relay ifdelete 

Delete an Ethernet interface from the PPP relay agent list.

502

ppp relay iflist 

Display all Ethernet interfaces added to the PPP relay agent list.

503

ppp relay sesslist 

Add an Ethernet interface to the PPP relay list.

504

Summary of Contents for 580





































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands