Speed Touch 580, Cli Reference Manual

Page: 353 / 676

Firewall Commands
E-DOC-CTC-20050531-0057 v1.0
333
firewall rule modify
Modify a firewall rule.
SYNTAX:
where:
firewall rule modify chain = <string>
index = <number>
[newindex = <number>]
[name = <string>]
[clink = <chain name>]
[srcintf [!]= <string>]
[srcip [!]= <{_10.0.0.138 | _192.168.1.254| private
| ssdp_ip | mdap_ip}>]
[dstintf [!]= <string>]
[dstip [!]= <{_10.0.0.138 | _192.168.1.254| private
| ssdp_ip | mdap_ip}>]
[serv [!]= <service expressions>]
[log = <{disabled | enabled}>]
[state = <{disabled | enabled}>]
[action = <action>]
If a value is preceded by a “!”, it means NOT.
For example “srcintf=!wan” means “if the source interface is different from WAN”.
chain The name of the chain which contains the rule. REQUIRED
index The number of the rule in the chain. REQUIRED
newindex The number of the rule in the chain. OPTIONAL
name The name of the new rule. OPTIONAL
clink The name of the chain to be parsed when this rule applies. OPTIONAL
srcintf The name of the source interface expression. OPTIONAL
srcip The name of the source IP expression. OPTIONAL
dstintf The name of the destination interface expression. OPTIONAL
dstip The name of the destination IP expression. OPTIONAL
serv The name of the service expression. OPTIONAL
log Disable or enable logging when this rule applies. OPTIONAL
state Disable or enable this rule. OPTIONAL
action The action to be taken when this rule applies ('link' when clink is used). OPTIONAL