Speed Touch 580, Cli Reference Manual

Page: 90 / 676

Config Commands
E-DOC-CTC-20050531-0057 v1.0
70
config load
Load complete saved (backup) or default configuration file.
SYNTAX:
where:
EXAMPLE:
RELATED COMMANDS:
Use the command
:config flush
before loading a configuration file.
config load [load_ip = <{disabled | enabled}>]
[defaults = <{enabled | disabled}>]
[flush = <{enabled | disabled}>]
[echo = <{disabled | enabled}>]
[filename = <string>]
load_ip Load IP settings (enabled) or not (disabled).
Note
Not keeping the IP settings could cause lost IP connectivity in the LAN.
OPTIONAL
defaults Load default configuration (enabled) or saved configuration (disabled).
Note
If not specified, the saved configuration will be loaded.
OPTIONAL
flush Flush the current configuration before loading a new configuration (enabled) or not
(disabled). OPTIONAL
echo Echo each command string when loaded (enabled) or not (disabled). OPTIONAL
filename Name of the configuration file to be loaded. OPTIONAL
=>ip rtlist
Destination Source Gateway Intf Mtrc
10.0.0.0/24 10.0.0.0/24 10.0.0.140 eth0 0
172.16.0.5/32 0.0.0.0/0 172.16.0.5 cip1 0
10.0.0.140/32 0.0.0.0/0 10.0.0.140 eth0 0
127.0.0.1/32 0.0.0.0/0 127.0.0.1 loop 0
172.16.0.0/24 0.0.0.0/0 172.16.0.5 cip1 1
=>config load flush_ip=no
=>ip rtlist
Destination Source Gateway Intf Mtrc
10.0.0.0/24 10.0.0.0/24 10.0.0.140 eth0 0
10.0.0.140/32 0.0.0.0/0 10.0.0.140 eth0 0
127.0.0.1/32 0.0.0.0/0 127.0.0.1 loop 0
=>config load flush=yes
=>ip rtlist
Destination Source Gateway Intf Mtrc
10.0.0.0/24 10.0.0.0/24 10.0.0.140 eth0 0
10.0.0.140/32 0.0.0.0/0 10.0.0.140 eth0 0
172.16.0.5/32 0.0.0.0/0 172.16.0.5 cip1 0
127.0.0.1/32 0.0.0.0/0 127.0.0.1 loop 0
172.16.0.0/24 0.0.0.0/0 172.16.0.5 cip1 1
=>
config list Show the current configuration set.
config save Store the current configuration in a backup file.