Software Driver Installation
Windows 7, 32/64 Bit
(c) Spectrum GmbH
29
On the upcoming Windows security dialog select install. To pre-
vent Windows 7 to always ask this question for future updates, you
can optionally select to always trust software from Spectrum.
The hardware assistant then shows you the exact board type that has
been found like the M3i.2132 in the example.
The drivers can be used directly after installation. It is not necessary to
restart the system. The installed drivers are linked in the device man-
ager.
Below you’ll see how to examine the driver version and how to update
the driver with a newer version.
Version control
If you want to check which driver version is installed
in the system this can be easily done in the device
manager. Therefore please start the device manager
from the control panel and show the properties of
the installed driver.
On the property page Windows 7 shows the date and the version of the installed driver.
After clicking the driver details button the detailed version information of the driver is shown.
This information is also available through the Spectrum Control Center.
Driver - Update
The driver update under Windows 7 is exact the same procedure as the initial installation. Please follow the steps above, starting from the
device manager, select the Spectrum card to be updated, right-click and select „Update Driver Software...“ and follow the steps above.
