manualshive.com logo in svg

Spectrum DX6R, Instruction Manual, Page: 33 / 42

Share
Download
Spectrum DX6R Instruction Manual Download Page 33

33

pHYSICAl TRANSMITTER ADJuSTMENTS

DROpDOWN STEERING WHEEl OpTIONS

The DX6R comes with the dropdown wheel installed. The dropdown can be 
rotated for a perfect feel or removed for a standard wheel layout. All the parts 
necessary to convert to the standard wheel are included. 

ROTATE:

•  Turn off the DX6R
•  Using a 2mm hex wrench, remove 3 

screws.

•  Rotate the drop down to the desired 

angle.

•  Align with the screw holes and re-

install the 3 screws being careful not 
to pinch any wires.

STANDARD WHEEl CONVERSION:

•  Using a 2mm hex wrench, remove the 3 screws from the drop down and 

remove the drop down from the transmitter. Carefully disconnect the 2 wiring 
harness from inside the transmitter.

•  Using a 1.5mm hex wrench, remove the steering wheel.
•  Using a 2mm hex wrench, remove 2 screws from the steering mechanism. 

Remove the steering mechanism from the drop down being careful to pull the 
wiring harness through the opening.

•  Keep the drop down in a safe place for future use.
•  Connect the 2 wiring harnesses to the board inside the DX6R. Note that one 

connector has 6 pins and 
the other has 7. 

•  Re-install the steering 

mechanism directly onto 
the transmitter using the 2 
screws

•  Re-install the steering 

wheel.

Wiring not shown

There are two wheel CAM’s included with the DX6R. They attach to the steering 
mechanism and physically limit the wheel travel. Use the 32º CAM with the large 
wheel and the 36º CAM with the Small steering wheel.

Tip

CAM

Summary of Contents for DX6R











































Reviews:

No comments