Spectrum DX6R Instruction Manual Download Page 28 | Manualshive

Page: 28 / 42

Spectrum DX6R Instruction Manual Download Page 28

28

DRIVE MODES

The current drive mode is always displayed in the
top left corner of the 4 main screens.
Every model can have several drive modes
programmed to a switch or button for on-the-fly
adjustments.
Once a drive mode is selected, Changes to model
setup, trim and timers will only effect that drive mode.

• Tap the ON-the-Fly Button drop down to select a

button or switch to enable instant mode changes.

• Tap on the Drive Mode button to change the drive

mode name

• Tap on Flag Color to change the color of the Drive

mode banner.

• Tap on Delete to delete drive modes (there must

be at least 1 drive mode).

• If more than 1 drive mode, tap on the arrow

buttons to order the list.

The Mapping screen displays an overview of all
transmitter and receiver functions as they are
currently setup for the active model. Use the
mapping screen to help correctly connect servo and
auxiliary equipment into the correct receiver port.

MAppING

«
...
26
27
28
29
30
...
»

Summary of Contents for DX6R











































Reviews:

No comments