manualshive.com logo in svg

Spectrum DX6R, Instruction Manual, Page: 21 / 42

Share
Download
Spectrum DX6R Instruction Manual Download Page 21

21

BRAkE CuRVE-

Brake response is adjustable using an EXPO or Custom Brake curves.

Standard- 

Linear output (default)                  

Exponential- 

Positive (+) EXPO values decrease 

brake sensitivity around neutral.  

Custom- 

Up to 7 selected points can be adjusted 

to custom tailor brake response throughout the 
range.
•  Tap on the line to add points.
•  Tap on a point to adjust its position using the 

sliders below.

•  Delete a point by tapping on it, then select 

Delete point (red box above graph)

On-the-fly Button- 

Select a switch for instant 

adjustment of the expo curve while driving.

THROTTlE & BRAkE/REVERSE

THROTTlE TRIM-

Throttle trim adjusts the steering neutral position 
and is used to adjust static brakes.
Throttle Trim is defaulted to Switch A but can be 
assigned to any trimmer/switch.  
•  Common-
•  Drive Mode-           

THROTTlE RATE-

Throttle rate is a full throttle limiter that limits the full 
throttle position.
Throttle Rate can be assigned to any trimmer/witch.          

Summary of Contents for DX6R











































Reviews:

No comments