SERVOPRO CHROMA Gas Analyser
53
04400001A / Revision 7
Use the mouse to zoom in the chromatogram. Left click and hold the mouse button
while moving the mouse to zoom in the region you want to observe. Press the
Undo Zoom (F8)
button to display the original chromatogram.
A real time chromatogram does not identify the conditioning board, it shows one
line on the graph. A trending chromatogram will display each conditioning board
in the
DIAGNOSTIC-TRENDING
menu
in a different colour.
1)
Set times as start/end (F4)
Use the
Set times as start/end (F4)
button to directly modify the peak data.
The times specified in the edit control for each position will be automatically
reported in the
Start
and
End
cells of the Peak data grid in the
CONFIGURATION-CYCLE
menu
for the peak selected after having pushed
the
Set times as start/end (F4)
button. To change the time for each position,
move the cursor to the desire position on the graph and click on the
corresponding button, either
Set Position #1 (F2)
or
Set Position #2 (F3).
The
difference between both positions (delta) is automatically calculated.
2)
Detector No (F5)
The
Detector No (F5)
button is enabled only when a trending is loaded. It will
move the cursor on the graph for the corresponding detector.
3)
Load (F6)
To change the chromatogram, use the
Load (F6)
button.
4)
Delete (F7)
Delete a chromatogram using the
Delete
(F7)
button.
5)
Export
Export a chromatogram to the USB stick using the
Export
button
