SERVOPRO CHROMA Gas Analyser
38
04400001A / Revision 7
4
THE USER INTERFACE
All analyser functions are accessed through the menus of the user interface. The
controls provided are explained in this section.
4.1 User Interface Controls
All analyser functions are accessed through the menus of the user interface. The
controls provided in the menus are explained in this section.
4.1.1
Edit Box control
The Edit Box control is used to input or view a numerical value. A typical use of
this control might be the input of the cycle length.
Figure 6: Edit Box control
When an Edit Box control is available to accept an input a cursor appears.
To operate an Edit Box control from the keyboard:
➢
Press LEFT or RIGHT to move the cursor.
➢
Press HOME to move the cursor to the beginning of text.
➢
Press END to move the cursor to the end of the text.
4.1.2
Radio control
The Radio control is used to select a mode of operation, for example, the range
mode.
Figure 7 : Radio control
To mouse or the keyboard can be used to operate an Edit Box control. The left and
right or the up and down arrows will switch between values.
