SpectraLink
Link 150 Installation and Operation
12/28/98
72
3. Set Up Access to Diagnostic Modem
The SpectraLink system can be accessed remotely for diagnostics using a remote
communications device built-in to the Link 150.
To set up this remote access, the Siemens-ROLM Technician should program a port to be
Direct Inward Dial (DID). The port should emulate a ROLMPhone 400.
The Installer connects the digital DID port from the ROLM system to the SpectraLink
MCU, Port 1, box 1. No wireless telephone will be registered to this port.
4. Program the ROLM
Each wireless telephone must be programmed so the ROLM switch will recognize the
wireless telephone and allow access to system facilities and features. The Siemens-ROLM
technician or local system programmer should perform the necessary programming.
Create Template Table for Wireless Telephones
Set up a template table with features assigned as shown below.
HOLD
CONNECT
TRANSFER
LINE 1
LINE 2
LINE 3
LINE 4
LINE 5
LINE 6
LINE 7
LINE 8
LINE 9
FORWD
SYSSP
CONF
FLASH
CAMP
SVRPT
MSGWT
MUTE
STASP
CALL WAITING
OPEN
OPEN
OPEN
The technician can customize the table by assigning features to the unused buttons in the
upper quadrant (above Call Waiting, accessed by FCN 0, FCN 7, and FCN *). Do not
Summary of Contents for Link 150
