58
• Press
OK
.
• Choose the option that suits your requirements in terms of
data collection type (Static or Stop & Go), the storage
location (Mem or USB) used to save the file, then press
OK
.
This starts the data recording. Refer to
to learn more about the workflow
used.
Autonomous or
SDGPS (SBAS)
Rover
On the receiver’s General Status screen, the receiver will
display “AUTO” or “SDGPS” when computing a position
respectively in autonomous or SDGPS mode. The computed
position is diplayed after pressing
.
Use the Web Server to configure the receiver:
• Go to
Receiver
>
Position
>
Rover Setup
• Set
Processing Mode
to
Autonomous
• Additionally, in the
Other Settings
section, you may change
the primary GNSS system used (
GPS
is the default
selection), limit the level of position accuracy to
SBAS
Differential Position
or
Standalone Position
.
• Select the model of dynamics that suits the movement
pattern of your rover best.
• Click
Configure
. The receiver starts operating in
autonomous mode. If SBAS satellites are received, the
receiver will be able to deliver positions with SBAS
Differential accuracy (provided SBAS is enabled; see
Receiver
>
Satellites
).
1
XYZ or
Lat-Lon-Height
Position
