31
4.
Position solution 2
: Position of second antenna, if any
second antenna connected to the receiver. Same
information is provided as above for first position solution.
When two position solutions are computed, there is a
figure displayed in the top-left corner of the screen
allowing you to know which position corresponds to which
antenna:
–
: Means the displayed position solution is that of
the primary antenna (input #1).
–
: Means the displayed position solution is that of
the secondary antenna (input #2).
5.
Heading
:
•
First line
: Number of satellites received, computation
status and number of satellites used.
Computation status:
- NONE: Check that the two antennas are connected.
- CALIB: Calibration is in progress, no valid heading
value is available yet.
- FLOAT: Integer ambiguities are being solved, no valid
heading value is available yet.
- FIXED: Heading computation is now effective.
•
Second line
: Computed value of heading
•
Third line
: Computed value of pitch
•
Fourth line
: Computed value of roll
The SP90m can deliver either pitch or roll, not both at the
same time.
Radio
When you access the Radio screen, the following information
is displayed:
•
First line
:
–
Receiver port that the radio is connected to: A, B or
F= external radio; D= internal radio
–
Radio function: “Rx” for receiver, “Tx” for transmitter
–
Radio model
–
Current power status: ON or OFF
•
Second line
: Channel number used and its corresponding
frequency, in MHz.
•
Third line
: Protocol used and transmission speed (baud
rate).
