Spectra Logic T-Series Spectra T200, User Manual

Page: 66 / 110

Chapter 7 – Replacing a Power Supply Module
66
3.
Set the malfunctioning power supply aside for return to Spectra Logic.
4. Slide the new power supply into the empty bay.
5. Using a #2 Phillips screwdriver, tighten the captive screw in the upper right corner
of the power supply module (see Figure 7-3 on page 65). As you tighten the screw,
the module is pulled it into the library until it engages the connector inside the
library. Tighten the screw until the module fits flush against the chassis.
6.
Package the power supply module and ship it to Spectra Logic as described in
Chapter 10 – Returning Components on page 101.
Restarting Backups
If necessary, use your backup software to restart any backups that were stopped when
the power supply malfunctioned.