Completing the Replacement
93
2.
Reinstall the shelf retaining bar and tighten the screws (Figure 9-25).
Note:
The shelves located behind the fan assembly do not use retaining
bars.
Note:
Do not replace any magazines or RXT media packs you removed
from the shelves. Instead, reimport the using your backup software
after you have restarted the library and tested the new transporter.
3.
Reinstall the fan assembly.
a.
Orient the fan assembly with the gasket material toward the outside and the
knurled nut to the left.
b.
Angle the right edge of the assembly behind the front right edge of the chassis
so that the notches in the edge of the assembly fit over the PEM nuts on the
chassis (Figure 9-26).
Figure 9-25
Reinstalling the chamber shelf retaining bar.
Figure 9-26
Position the fan assembly in the front of
the chassis.
Retaining bar
Screw
Front edge of chassis
PEM nuts
Gasket material
Summary of Contents for T-Series Spectra T200
