Chapter 5. Using the HTTP Interface
33
Fibre Port
Identifies the World Wide Number (WWN) and the link state for libraries with
a Fibre Channel interface. Click on
Fibre Port
to configure. For more information
on configuring the fibre interface, go to
Ethernet Port
Identifies the Hostname, the IP address and the port speed for libraries
with an Ethernet interface. Click on
Ethernet Port
to configure. For more
information on configuring the ethernet interface, go to
Library
This section identifies the library type, the current library firmware version, and the
library serial number.
Tape Drive
This section identifies the tape drive type, the current tape drive firmware version, and
the tape drive serial number.
This section details information about the library and drives.
Note:
You cannot configure from this screen; it is informational only.
This section details information about the library interface, either Fibre Channel or
Ethernet.
Note:
You cannot configure from this screen; it is informational only.
Device
Controller