Speck pumpen BADU BADUJET Turbo Pro, Translation Of Original Operation Manual

Page: 44 / 50

Faults
44 EN 08|2020
7 Faults
NOTICE
The magnet-coupled drive unit is mounted on slide bearings.
When the plain bearing is run dry it creates warmth and both the
plain bearing and pump parts are damaged.

Ensure that the pump/unit is always filled with the pump
media. This also applies to checking the rotation direction.
7.1 Overview
Problem: Motor does not start
Possible cause Solution
Error protection device has
tripped.  Switch the circuit breaker
back on.
 Have it checked by an
electrician.
Frequency converter not
connected correctly.  Plug the connection
correctly (bayonet catch).
Problem: Piezo button does not light
Possible cause Solution
Cable wired incorrectly.  Check and set correctly.
Sensor defective.  Check and replace if
necessary.
Problem: Radio transmitter does not work
Possible cause Solution
Battery inserted incorrectly or
dead.

Insert battery the right way
round.

Replace battery.
Transmitter immersed in water
for too long.  Remove batteries and dry
the transmitter at max.
40 °C.
 Replace batteries if
necessary.
Problem: Fuse in the house distributor trips
Possible cause Solution
Wrong or fast fuse installed.  Check connections.
 Use 16 A slow-blow fuse.