Spearhead Swipe
E
150/
E
180/
E
210
23
23
23
23
The Spearhead Warranty
The Spearhead Warranty
The Spearhead Warranty
The Spearhead Warranty
Spearhead warrants that the Spearhead machine referred to in the Warranty Registration
Form will be free from defects in materials and workmanship for a period of 12 months from
the date of sale. This warranty does not affect your statutory rights, but merely adds to them.
Should you have a problem within 12 months from the date of sale please contact your
original Spearhead dealer, or Spearhead’s Service Department. Any part found to be
defective during this period will be replaced or repaired, at Spearhead’s discretion, by the
dealer or a Spearhead Service Engineer.
Spearhead Warranty Conditions
Spearhead Warranty Conditions
Spearhead Warranty Conditions
Spearhead Warranty Conditions
1. The Warranty Registration Form must be completed and returned to
Spearhead within 30 days of the date of sale
2. This warranty does not cover defects arising from fair wear and tear, willful
damage, negligence, misuse, abnormal working conditions, use in
competition, failure to follow Spearhead’s instructions (oral or written,
including all instructions and recommendation made in the Operator’s
Manual) or alteration or repair of the machinery without Spearhead’s
approval.
3. The machinery must have been serviced in accordance with the Operator’s
Manual and the Service Log must have been kept up to date and made
available to the dealer should service, repair or warranty work be undertaken.
4. This warranty does not cover claims in respect of wearing parts such as
blades, flails, paintwork, tyres, belts, hydraulic hoses, bearings, bushes,
linkage pins, top links, ball ends unless there is a manufacturing or material
defect or the cost of normal servicing items such as oils and lubricants.
5. This warranty does not cover any expenses or losses incurred whilst the
machinery is out of use for warranty repairs or parts replacement.
6. This warranty does not extend to parts, materials or equipment not
manufactured by Spearhead, for which the Buyer shall only be entitled to the
benefit of any such warranty or guarantee given by the manufacturer to
Spearhead. Only genuine Spearhead replacement parts will be allowable for
warranty claims.
7. All parts replaced by Spearhead under warranty become the property of
Spearhead and must be returned to Spearhead if Spearhead so request.
Such parts may only be disposed of after a warranty claim has been accepted
and processed by Spearhead.
8. Spearhead is not liable under this warranty for any repairs carried out without
Spearhead’s written consent or without Spearhead being afforded a
reasonable opportunity to inspect the machinery the subject of the warranty
claim. Spearhead’s written consent must, therefore, be obtained before any
repairs are carried out or parts replaced. Use of non- Spearhead parts
automatically invalidates the Spearhead Warranty. Failed components must
not be dismantled except as specifically authorised by Spearhead and
dismantling of any components without authorisation from Spearhead will
invalidate this warranty.
9. All warranty claims must be submitted to Spearhead on Spearhead Warranty
Claim Forms within 30 days of completion of warranty work.
Using the machine implies the knowledge and acceptance of these
instructions and the limitations contained in this Manual.
