Spearhead Swipe
E
150/
E
180/
E
210
6
6
6
6
MACHINE DESCRIPTION & PURPOSE OF USE
The SP Range of machines are ‘3-point linkage’ tractor mounted rotary
mowers ideal for the cutting of grass, weeds and pasture materials of up to
25mm (1”) diameter. The flexible 3-point hitch design allows the mower to
follow the contours of the ground for optimum cutting performance with
minimum stress on the machine and tractor. A rear tail wheel with puncture
proof tyre is fitted as standard for control of cutting height. Machines are
suitable for tractors of 15HP and over with 540RPM PTO speed.
These machines should only be used to perform tasks for which they were
designed – use of the machine for any other function may be both dangerous
to persons and damaging to components and is therefore not advisable.
MACHINE IDENTIFICATION
Each machine is fitted with an identification plate with the following
information:
1. Machine (Part Number)
2. Machine Serial No.
3. Machine Weight
When ordering spares or replacement parts from your local dealer it is
important to quote both the Part Number and the Serial Number as stated on
the identification plate so the machine and model can be quickly and correctly
identified.
TECHNICAL SPECIFICATIONS
S
Specifications
SP- 5 model
SP- 6 model
Working Width
1.50m (4’9”)
1.80m (5’9”)
Transport Width
1.60m (5’2”)
1.93m (6’3”)
Length
2.46m (8’)
2.69m (8’8”)
Weight
300kg
430kg
Cutting Height
25-150mm
19-150mm
Cutting Capacity
25mm
25mm
Power (min.)
20HP
30HP
Gearbox protection Slip clutch
Slip clutch
Guards
Front / Rear
Front / Rear
Tail Wheel
Laminated
Laminated
PTO Type
Independent
Independent
PTO Speed
540 rev/min
540 rev/min
PTO Size
1.3/8" (6 spline)
1.3/8" (6 spline)
