Spearhead Swipe
E
150/
E
180/
E
210
14
14
14
14
FITTING MACHINE TO THE TRACTOR
Attachment of the machine to the tractor should always be performed on
a firm level site.
The procedure for fitting the machine to the tractor is as follows:
• Disengage the PTO drive.
• Reverse tractor squarely to the machine (Fig.6).
• Gradually reverse tractor until lift arm holes (1) are level with mounting pins
(2).
• Fit left lift arm into mounting pin.
• Adjust height of right lift arm if necessary.
• Fit right arm on to the mounting pin then lock with lynch pin.
• Fit top stay of machine to top link on tractor (3), adjusting the length with the
machine level on the skids (4)
• Secure with pins provided with tractor.
• Adjust lift arm check chains to prevent machine from swaying when raised.
• Fit PTO shaft – for first time attachment to a tractor refer to following page
for details regarding measurement and cutting of a PTO shaft.
