Spearhead Swipe
E
150/
E
180/
E
210
10
10
10
10
SAFETY DECAL IDENTIFICATION
Safety decals are located on various points of the machine. They can be
identified by the yellow upper panel depicting the hazard, and the lower white
panel indicating means of avoidance or precautions to be taken. These decals
have no text. It is essential that all operators and personnel associated with
the machine fully understand their meanings, which are shown below. Any
safety decals which are found missing should be replaced.
1. Driveline Guard Missing - Ensure PTO guard is fitted to the machine
before operating.
2. Read Instructions - Always fully read and understand the instructions
before using the machine.
3. Keep Nuts Tight - Ensure all nuts and bolts are tight before commencing
work with the machine.
4. Keep Out Zone - Keep at a safe distance from the machine to avoid being
crushed.
5. Unsupported Machine - Do not attempt to get underneath the machine
because of the risk of fall.
6. Thrown Debris - Keep at a safety distance from the machine to avoid the
risk of debris being thrown from the machine.
7. Rotating Blades Danger - Remove the ignition key and read the
instructions before working on or getting close to the machine, as the blades
may still be rotating.
8. Shaft Entanglement - Keep at a safe distance from the machine to avoid
being caught in guarding, rotor shaft, or the PTO shaft.
9. Unblock Rotor Head – Ensure rotary head has come to a complete stop
before attempting to unblock the blades.
10. Max PTO Speed 540 ACW – PTO speed not to exceed 540 RPM anti-
clockwise.