14
Controlling the heat output to the
storage system:
(ambiente a3 and a4 only)
The heat output to the storage stones
can be controlled via the adjustment
lever (
Fig. 6e
). If the adjustment
lever is moved to the ‘+’ position,
the convective heat is transmitted
directly from the stove to the room.
The room will warm up faster at this
setting. If the adjustment lever is set
to the ‘-’ position, the convective heat
will remain in the storage stones for
longer. The heat is stored in the stove and slowly released to the room after
the fire has gone out. The stove will continue to provide a cosy warmth even
when the fire has gone out.
A
Front stone
B
Supporting plate
C
Convective heat to room
D
Connecting sleeve
E
Cover
F
Convective heat to storage stones
G
Convection air adjustment lever
ambiente a5
The ambiente a5 stove can be optionally fitted with storage stones for pro-
longed heat storage. Proceed as follows to fit the stones: In order to fit
storage stones to the ambiente a5 stove, the first step is to remove the stove
top cover (
Fig. 7a
).
Now push the ‘front’ storage stone (WxHxD 310 mm x 285 mm x 30 mm)
into the front locating slot (
Fig. 7b
). Next, place the two ‘back’ storage
stones (WxHxD 250 mm x 390 mm x 30 mm) in the locating slot at the rear
of the body (
Fig. 7c
). Place the ‘top’ storage stones (
Fig. 7d - 7h
) on the top
Fig. 6e
Fig. 7a
Fig. 7b
Fig. 7c
Fig. 7d
