Form No. 43539049
–4–
Oct 2013
E)
Hose Kits – No. 2A, 2B, 5B & 5D Controls:
6FT Hose with 3/8” swivel female flare fittings
and 6” spring, Part #30522061
10FT Hose with 3/8” swivel female flare fittings
and 6” spring, Part #30522101
Each kit includes (2) 45 deg. flare fittings (3/8”
tube x 1/2” NPT) for connection to main gas
valve and manual shut-off valve.
Hose Kits - No. 3, 9 Controls:
6FT Hose with 3/8” swivel female flare fittings and 6” spring, Part #30522060
10FT Hose with 3/8” swivel female flare fittings and 6” spring, Part #30522100
Each kit includes (1) 45 deg. flare fitting (3/8” tube x 1/2” NPT) for connection to manual
shut-off valve and (1) 45 deg. flare fitting (3/8” tube x 3/8” NPT for connection to main gas
valve.
F)
Manual Gas Shut-Off Ball Valve – 1/2”NPT, Part #30285000
G)
Wire Brush – Long, Part #43295020
Wire Brush – Short, Part #43295010
4.
BROODER ASSEMBLY
Make sure that all components are present before assembling the brooder:
Qty. Description
Qty. Description
(1) Control Arm
(includes Pilot Assembly on 2A, 2B,, 3 and 9 models)
(3) Support Brace
(1) Control Arm Mounting Bracket
(1) Single Jet Burner Tube
(1) Fastener Kit
(1) Windshield
(Pilot models only)
(1) Burner Pan
(1) Ceramic Cone
(1) Ceramic Holder Ring
(1) Canopy
(46” or 34”)
(1) Center Hanger
(1) Ignition Control
(5B/5D models only)
(1) End Hanger
(1) Ignition Control Bracket
(5B/5D models only)
(1) Safety Pan
(1) Electrode & Bracket
(5B/5D models only)
(1) Ceramic Heat Shield
NOTE: The Fastener Kit contains all the screws, washers and nuts required for brooder assembly of each
control type. Discard any extra fasteners not required for a particular control type. Tools required to
assemble the brooder are as follows: Adjustable Wrench, 3/8” End Wrench, 7/16” End Wrench, Flat Blade
Screwdriver, and Pliers.
