Form No. 43539049
Oct 2013
–23–
9.
LIGHTING AND SHUTDOWN INSTRUCTIONS
NO. 2A CONTROL (#VR8200M VALVE) and NO. 2B CONTROL (#7000ERLC VALVE)
1. Turn gas control knob counterclockwise
to “PILOT”.
2. Push and hold down the red reset button on the 2A controls or black knob on 2B controls while you light
the pilot. Immediately light the pilot. Continue to hold the control/reset button or knob down for about
one (1) minute after the pilot is lit. If it goes out, wait five (5) minutes before trying to relight the pilot.
NOTE: If the reset button (2A controls) does not pop up when released, stop and immediately call your
service technician or gas supplier.
3. If the pilot will not stay lit after several tries, turn the gas control knob clockwise
to “OFF” and call your
service technician or gas supplier.
4. When the pilot flame remains lit, turn the gas control knob counterclockwise
to “ON”.
5. Turn on electrical power supply to the brooder.
6. Adjust the wall mounted thermostat to change the temperature setting. Adjust as desired for bird
comfort.
7. NOTE: To turn off the main burner only, turn the gas control knob clockwise
to “PILOT”. For complete
shutdown, turn the gas control knob clockwise
to “OFF”.
SCHEMATIC
FIGURE 11c