Form No. 43539049
Oct 2013
–11–
4H. COMPLETE BROODER ASSEMBLY (Pilot Models Shown)
WARNING:
ONCE THE BROODER IS ASSEMBLED AND BEFORE IT IS FIRST FIRED, YOU MUST CHECK FOR
GAS LEAKS! USE A SOAP AND WATER SOLUTION AND APPLY AT ORIFICE FITTING AND FIELD CONNECTION
AT THE GAS VALVE.
5.
MINIMUM CLEARANCES TO COMBUSTIBLES
Minimum clearances to combustible materials shall
be measured from the outer surface of the canopy
as shown in the following table:
FIGURE 7a
FIGURE 7
