4
Thank you!
Congratulations on purchasing the BMS-10P SOYER stud welder.
You have made an excellent choice. Your BMS-10P SOYER stud welder was specially developed for
the high-speed fastening of SOYER weld studs in compliance with
DIN EN ISO 13918
on metallic,
weldable workpieces.
Our devices have been tested and proven according to current European and national
guidelines on health and safety. Proof of conformity has been established and the
manufacturer is in possession of the corresponding documents.
FOR YOUR SAFETY
Read all of these operating instructions prior to start-up. Please follow all safety
precautions as well as all chapters of these operating instructions before starting
to weld. Non-compliance with the safety precautions can result in serious
personal injuries or death.
SOYER
®
is a registered trade mark of Heinz Soyer Bolzenschweißtechnik GmbH.
It is prohibited to distribute or reprint this document. It is also prohibited to exploit or disclose its
contents unless permission has been expressly granted. Non-compliance with this regulation will lead
to compensation for damages. All rights reserved, particularly in the case of a patent grant or a GM
registration.
We have verified that the contents of this pamphlet correspond to the hard- and software described.
Deviations, however, cannot be excluded so that we cannot warrant for absolute compliance. The
illustrations contained in this instruction manual can vary in some details from your product. This,
however, has no influence on the handling of the machine
The data in this documentation is verified regularly and any necessary corrections incorporated in
future impressions. Any suggestions for improvement are appreciated.
Date of issue:
January 01, 1998
Revision: rev.
06.2013
© Heinz Soyer Bolzenschweißtechnik GmbH 2013 · All rights reserved
Printed in the Federal Republic of Germany
Summary of Contents for BMS-10P
Page 2: ......