Soyer BMS-10P, Operating Instructions Manual, Page: 15 / 54

15
3.3 Technical data
Designation BMS-10P
Welding process Capacitor discharge stud welding
Standard gun PS-3
Welding range
M3 - M8 or Ø 3 - 8 mm with steel, stainless steel, aluminium and
brass (M8 or Ø 8 in aluminium and brass conditionally, depending on
the respective requirements)
Power source Capacitor bank with capacitance change-over 33,000 / 99,000 µF
Charging voltage 60 - 200 V infinitely variable up/down
Welding sequence Up to 20 studs/min (depending on stud diameter and type of feed)
Power supply 230 V, 50/60 Hz, 10 A (
*2
OPTION 115 V )
Fuse T 10 A (5 x 20 mm time-lag fuse)
Type of cooling F
System of protection IP 21
Dimensions 430 x 220 x 560 mm (w x h x d)
Weight *1 26 kg
*1
Colour RAL 5009 azure blue
Technical specifications are subject to change without notice
WARNING
The "S" symbol is the symbol for welding current sources permitted for operation with
increased electrical danger. The "S" symbol on our stud welders refers exclusively to
the welding current circuit and not to the complete stud welding equipment.
*1 Slight
deviations are possible depending on accessories.
*2
The BMS-10P stud welder is suitable for operation with 115 V or 230 V. Please refer to the type plate for the current
mains supply.