22
5.1.5 Fuse
element
The BMS-10P stud welder is protected by a 10 AT fuse.
CAUTION
Should it become necessary to replace fuses, only use those with specified
electrical values. Oversized fuses could either cause defects to the electrical system
or a fire.
Always disconnect the mains plug from the power supply when replacing
fuses!
5.1.6 Connecting
elements
Mains cable
The mains cable serves to connect the stud welder to the power supply.
Ensure correct connected loads for electrical connections as indicated on the
type plate of the stud welder.
Earth cable socket
The earth cable socket serves to connect the earth clamps to the stud welder
.
Control cable socket and welding cable socket
The control cable socket and welding cable socket serve to connect the stud welding gun to the stud
welder.
• Test jack GUN
The test jack GUN serves to connect the measuring line of the gun.
• Test jack GROUND
The test jack GROUND serves to connect the measuring line of the ground connection.
• Air function "forward"
Connection for welding guns or heads with automatic stud feed.
• Air function "back"
Connection for welding guns or heads with automatic stud feed.
Summary of Contents for BMS-10P
Page 2: ......