Soyer BMS-10P, Operating Instructions Manual, Page: 26 / 54

26
5.4 Copying a welding program
Welding programs should be copied when carrying out further parameter tests to save values already
determined.

Set "MODE" parameter to "OP".

Choose a program that is already occupied.

Press the "ENTER" key.
The following message appears on the display:
The stud welder displays the first free program site available where you can store the program to be
copied. However, you can also select another free program site by means of the "Arrow up/down”
keys. Press "Arrow left" key to store the program to be copied. The copied program appears on the
display. Reference values which have been stored for the quality control will also be copied.
5.5 Deleting welding programs
It is possible to delete user welding programs which are no longer required in order to have a clearly
arranged program overview.

Set "MODE" parameter to "OP".

Select the program to be deleted on the display.

Press /// - key (delete key).
The following message appears on the display:
The function can be terminated by pressing the "Arrow right" key without deleting the selected
program. This proves to be useful if the /// key has been pressed unintentionally.
The selected program is deleted by pressing the "Arrow left" key and shown as free program on the
display.