Cordless Handset Operation
Cordless Handset CID Operation
Receiving Calls
When caller ID is activated, the Telephone Company sends the caller`s telephone number (and name, if
available) and the call`s date and time between the first and second rings. The device receives and displays
this information for each call and updates the display with the current date and time. The NEW CALL
indicator will be flashed.
The display also indicates if caller information is not available or if the sender intentionally blocks the
number.
After 20 seconds, the display will return to standby mode and shows ``NEW CALL XX`` where XX is the
number of unread calls. NEW CALL LED indicator blinks until the user retrieves all new messages.
Note: If the received CID number is 10 digit long and the first three digits match with the area code set by
user, the LCD shows the last 7 digits only (area code will be omitted).
During incoming call, cordless handset auto OFF hook, if press any keys.
In stand-by mode, NEW LED flashing, pressing ``*`` or ``#`` button, the LCD displays the last new call
information.
Repeatedly press ``*`` or ``#`` button to review all new call information in the order of receiving unit LCD
displays ``END NEW CALL`` and the NEW LED off.
If the received call information is same as the existing new calls, the ``RPT`` icon will be on to indicate
REPEAT CALL. The most recently arrived CID will be saved attached with a new date/time stamp. The
previously arrived record will be deleted. After you review this call, the ``RPT`` icon will be off.
If not review over all new calls, after 20 seconds the Time of Day will display and the new call counter will
show the total number of new calls including those already reviewed.
Press ``CH`` button to return to stand-by.
No press any button for 20 seconds, it will return stand-by mode.
Reviewing New Calls
Reviewing Old Calls
In stand-by mode, press ``*`` or ``#`` button to review old call information from the oldest to the newest
(``*`` button) or from the newest to oldest (``#`` button).
When finish reviewing all calls, the ``END`` is display.
If there is no calls, the display shows ``NO CALLS``.
*Press ``CH`` button to return to standby.
*No press any button for 20 seconds, it will return standby mode.
Delete All Call
Only cordless handset has this feature.
If the new call information has been reviewed, it can erase all call records. If there are any new calls in call
list, Erase All will not work.
Press and hold ``Del`` button for 2 seconds in standby mode. The LCD displays ``ERASE ALL?``.
Press ``Del`` button again to confirm deletion, and back to standby mode.
*Press ``CH`` button to return to standby.
*No press any button for 20 seconds, it will return standby mode.
Set VIP Calls
Only cordless handset has this feature.
The user can create VIP call records. When a VIP call is received, 4 beeps will be heard after
the ring, NEWCALL indicator will have no special LED response for VIP calls and VIP icon will
be on. All CID memory can be set as VIP.
23
24
Cordless Handset CID Operation
Press ``#``` or ``*`` button to select the caller to which you want to assign a VIP.
Press and hold CALLS button for 2 seconds, the VIP icon is on.
Press and hold CALLS button for 2 seconds, the VIP icon will disappear as VIP call.
*
Press CH button to return to standby.
*No press any button for 20 seconds, it will return standby mode.
Caller ID Redial
The unit allows you to redial a phone number stored in the Caller ID memory. If the local area code was
programmed, only the 7-digit number will be displayed and dialed. If the area code is different than the one
you have programmed, the full 10 digit number is displayed and a ``1`` will automatically be added to the
dialing sequence. To skip the digit ``1``, press ``Calls`` button twice within 2 seconds to begin dialing out
number.
Press ``#`` or ``*`` button to select the caller ID which you want to dial.
Press CALLS button one. The display will show ``DIALING``.
After 2 seconds delay, the unit will enter TALK-ON mode automatically. Dialed digits shift to the display
from right to left-hand side as line size.
Press CH button to return to standby.
No press any button for 20 seconds, it will return standby mode.
Caller ID Re-dialing 7- and 10-digit Numbers
Note that if a CID number to be dialed is 10 digits long, an access code ``1`` will be automatically inserted
before the 1st digit by press CALLS button once. The insertion of such access code can never the less be
suppressed by activing CID-redial function differently, i.e. by press & release
CALLS
button twice wihtin 2
seconds.
If a 10 digits long CID number (123-456-7890), the first 3 digits of the number matches local area code,
the area code will be skipped and only the last 7 digits will be dialed out in the re-dialing.
It is also possible to insert an access code ``1`` in front of 7-digit numbers. Press and release CID
``CALLS`` button twice within 2 seconds to do so.
Press ``CH`` button to return to standby.
No press any button for 20 seconds, it will return standby mode.
Save CID to Indirect Memory
Only cordless handset has this feature.
Press ``#`` or ``*`` button to select the Caller ID number that you want to save.
Press MEM button to show ``LOCATION? XX``.
Note: Only number can be saved to indirect memory.
Cordless Handset Operation
PDF created with FinePrint pdfFactory trial version
http://www.fineprint.com