Speakerphone Operation
For best speakerphone performance, avoid the followings:
·
Areas with high background noise. (The microphone might pick up these sounds).
·
Surfaces affected by vibration.
·
Recessed areas such as in a corner, under a cupboard, or next to a cabinet, which can generate an echo
effect.
Note the following guidelines when you use the speakerphone.
·
Stay reasonably close to the phone so that you can be clearly heard by the person to whom you are
speaking.
·
The SPEAKER indicator is on when the speakerphone is in use.
Receiving a Call with Speakerphone
·
When the phone rings, press and release the SPEAKER button on the base unit and talk normally into
the buit-in minimum distance of 8-9 inches.
·
Adjust speakerphone volume by pressing the volume up or down arrow buttons on the base.
·
To end the call, press the SPEAKER button again.
Making a Call with Speakerphone
·
Press and release the SPEAKER button on the base unit and wait for a dial tone.
·
Dial the number (using a memory dial number, if desired.) The number you dialed shows on the
display. Or, dial the number and then press the SPEAKER button.
·
When the party answers, adjust speakerphone volume by pressing the volume up or down arrow
buttons.
·
To end the call, press the SPEAKER button again.
Switching Between Corded Handset and Speakerphone
During a call or intercom in speakerphone mode-pick up the handset and voice will be diverted automati-
cally to handset. Speakerphone LED will turn off.
During a call or intercom in corded handset-press the SPEAKER button and the speakerphone LED will
blink 0.5s on and 0.5s off. Voice will be diverted to speakerphone once corded handset is put back to base
cradle. If handset is not put back to cradle within 10s, the operation will be cancelled automatically.
For corded handset, press and release the hook switch within a short while.
-Or, use the FLASH buttons on the base and cordless handset to activate custom calling services such as call
waiting or call transfer, which are available trough your local phone company.
Note: Don`t use the TALK/SPEAKER button on the cordless handset/base to activate custom calling
service such as call waiting, or you`ll hang up the phone.
Last Number Redial
Pick up the corded handset and press REDIAL button. Or, press the REDIAL button first, then pick up the
handset.
Note that number cannot be dialed in intercom or conference mode. Redial memories are independent in
cordless handset and base.
Duration Counter
After you received a call or made a call by cordless handset or base, the built-in call duration counter shows
on the LCD on the taking side, and begins counting the length of time of the call. The other idle side will
show ``LINE IN USE`` on LCD.
Duration counter will not be shown or will be removed once:
Intercom happened during a call
3-way conference happened during a call
Switching a Call to and from Cordless Handset
A call can be switched directly between cordless handset and base.
During a call, start an intercom session from the paging side by pressing INTC button. The paged side shall
commit the intercom by pressing the INTC button.
The paging side can then press the INTC button to let the paged side to continue the call.
Conference Operation
During a call by Cordless Handset---Direct pick-up of corded handset pressing the base speakerphone. Call
duration will not be displayed and the LCD on both sides will show ``CONFERENCE``.
During a call by Corded handset or Speakerphone---Pressing TALK button on the cordless handset. Call
duration timer will not be displayed and the LCD on both sides will show ``CONFERENCE``.
During conference, no digit can be dialed.
Intercom Operation
During a call, set up the intercom session. The paging party can put the paged party into conference with
the line by pressing the CONF button.
During conference, no digit can be dialed.
Corded Handset Operation
27
28
In the conference status, there is no anything action when you pressed any key. After you press the
``FLASH`` button, you could press the digit keys to play the number.
3-Ways Conference:
During incoming call, Then pick up by cordless handset or corded handset or speakerphone, you can
activate the conference call to incoming caller by pressing speakerphone button or pick up corded handset
or press the talk button directly.
Preview Dialing Function
1. For cordless handset, you can press the digit numbers as you wanted, that it will show the number on
handset LCD display, and then press the ``TALK`` button for dialing out the number.
2. For speakerphone, you can press the digit numbers as you wanted that it will show the numbers on base
LCD display, and then press ``SPEAKER`` button for dialing out the number.
3. For corded handset, you can press the digit numbers as you wanted that it will show the number on base
LCD display and then pick up corded handset for dialing out the number.
PDF created with FinePrint pdfFactory trial version
http://www.fineprint.com