Southwestern Bell GH3080, Owner'S Manual, Page: 19 / 24

Retrieve Messages from the GH3080 Handset
Your answering machine can be operated
remotely from the GH3080 handset.
Note: Your GH3080 handset MUST be fully
charged to access remote functions.
1.Press and release the ``CH`` key on the handset.
The unit is now in remote mode.
2.The voice menu will direct you to press the
following buttons on your keypad:
Option Press
Play back messages
Erase all messages
Record new outgoing greeting
Return to main menu
If You Press 1 or 2 Press
(To Play back Messages)
Erase current message
Repeat current message
Stop message playback
Skip to next message.
To save the messages you have listened to,
hang up the telephone.
If You Press 3
(To Record New Outgoing Greeting
Record Answer On Greeting When Set To
Answer On Mode Already
Record Annouce Only Greeting When Set To
Annouce Only Mode Already)
1.The unit will say ``Record greeting after
the beep. Press 5 to end recording``.
2. Record your new outgoing greeting (up to
30 seconds).
3.When you have finished recording your
outgoing greeting, press 5. The new outgoing
greeting will be played back to you.
4.Hang up the phone.
Retrieve Messages from the GH3080 Handset (Cont.)
35 36
(1)
(2)
(3)
(7)
(2)
(4)
(5)
(6)
Day/Time Check
Press and release the Day/Time button. It will
playback the current DAY/TIME setting. If the
day/time has not been set, it will say ``Time is not
set``. If the day/time has been set, it will playback
in this sequence:
Mode Day Hour Minute
e.g. January Sixteen Two Fifteen AM
Day/Time Set
2 Ways to set day/time
-
Automatic update by Caller ID date and time
information.
-Manual Setup.
Manual Setup:
-Press and hold ``DAY/TIME`` key 2secons.
-Unit will announce current day/time and ``Enter
new day time``.
Sequence of Set Day/Time:
Set Month Set Day Set Hour Set Minute
-Press ``SKIP`` Increment one tap (from January
to February).
-Press ``BACK`` decrement on tap.
(Press January to December)
-Press ``GREET/STOP`` will quit the Day/Time
manual setup.
-Press ``DAY/TIME`` go to next state.
(Set Month Set Day)
-When setting minute, press ``DAY/TIME`` will
store the setting.
Note: In case, the base unit is no AC power. The
base unit should be operated:
1. Only Tone dialing feature regardless the T/P
switch position.
2. The time for seize line when off hook will be =<
2 sec.
3. Working for line voltage >=40V.
2
.4
G
H
Z
PDF created with FinePrint pdfFactory trial version http://www.fineprint.com