Sourcetronic ST2826, Operation Manual

Page: 128 / 145

ST2826 Operation manual Ver1.0
◇
118
e.g.
：
WrtCmd(―COMP:BIN:COUN ON‖)
query syntax
：
COMParator:BIN:COUNt[STATe]?
return
：
<NR1><NL^END>
:BIN:COUNt:DATA? is used to query the BIN count result.
query BIN
：
COMParator:BIN:COUNt:DATA?
return
： <BIN1 count>,<BIN2 count>,…,<BIN9 count>,<OUT OF BIN count>,
<AUX BIN count><NL^END>
<BIN1-9 count>:NR1 format, is the count result of BIN 1 to 9.
<OUT OF BIN count>: NR1 format
，
is the count result of over the standard.
<AUX BIN count>: NR1 format
，
is the count result of the auxiliary BIN.
:BIN COUNT:CLEar is used to clear all the count result.
command syntax
：
COMParator:BIN:COUNt:CLEar
e.g.
：
WrtCmd(―COMP:BIN:COUN:CLE‖)
8.1.16Mass MEMory subsystem command set
Mass MEMory subsystem command set is used to save and load the file.
Command hierarchical chart:
Mass MEMory :LOAD :STATe <record number>
:STORe :STATe <record number>
:LOAD:STATe is used to load the saved file.
command syntax
：
MMEMory:LOAD:STATe <value>
<value>:the file sequence number of 0 to 9 (NR1 format).
e.g.
：
WrtCmd(―MMEM:LOAD:STAT 1‖);
:STORe:STATe is used to save the current setting for the instrument as one file.
command syntax
：
MMEMory:STOR:STATe <value>
<value>: the file sequence of 0 to 9 (NR1 format) .
e.g.
：
WrtCmd(―MMEM:STOR:STAT 1‖);
8.2The GPIB common command for ST2826
●*RST ●*TRG ●*IDN ●*TST