ST2515 Operation Manual
55
Query syntax: FUNCtion:IMPedance?
Return Format: <function><NL^END>
If the current “function” is R-T, it will returns to RT.
The :IMPedance:RES:RANGe command sets the instrument range in common resistance
measurement pattern.
The FUNCtion:IMPedance:RES:RANGe? query returns to the current range parameters in
common resistance measurement pattern.
Command Syntax: FUNCtion:IMPedance:RANGe <value>
Where, <value> can be the impedance of the tested LCR component or the specific
range values. Its data format is NR1, NR2, NR3, <value> = 0 to 110E+6.
For example: WrtCmd(“FUNC:IMP:RES:RANG 123”); Set the instrument range in common
resistance measurement pattern as 200Ω.
Query syntax: FUNCtion:IMPedance: RES:RANGe?
Return format: <value><NL^END>
Where, <value> can be:
20.0000E-3, 200.000E-3, 2000.00E-3, 20.0000E+0, 200.000E+0,
2000.00E+0, 20.0000E+3, 110.000E+3,1100.00E+3, 11.0000E+6,
110.000E+6
The :IMPedance:RES:RANGe:AUTO command sets the range auto selection mode in common
resistance measurement pattern.
The FUNCtion:IMPedance:RANGe:AUTO? query returns to the current range mode.
Command syntax:
ON (1)
:IMPedance:RES:RANGe:AUTO
OFF (0)
Where,
Character 1 (integer:49) means ON.
Character 0 (integer: 48) means OFF.
For example: WrtCmd(“FUNC:IMP:RES:RANG:AUTO ON”); Set the range mode in common
resistance measurement pattern as AUTO.
Query syntax: FUNCtion:IMPedance:RES:RANGe:AUTO?
Return format: <NR1><NL^END>
<NR1> = 1 or 0
The:IMPedance:LPR:RANGe command sets the instrument range in resistance tested at low
voltage measurement pattern.
The FUNCtion :IMPedance:LPR:RANGe? query returns to the current range parameter in
resistance tested at low voltage measurement pattern.
Command syntax: FUNCtion:IMPedance:LPR:RANGe <value>
Where, <value>can be the impedance of the tested LCR component or the specific
