SA262
Ventris Dual Reverb Owner’s Manual
57
How do I update the firmware?
Firmware updates are available via the Neuro Desktop Editor using the USB port. Power the pedal
and connect it to your computer using a mini USB cable. The Neuro Desktop Editor is available from
Source Audio’
s website:
http://www.sourceaudio.net/support/downloads
. While the pedal is
connected, select the Arrow Icon located in the Ventris Dual Reverb square in the Connections field.
Mac Gatekeeper
Mac users may see this
warning message when trying to open the updater software: “App can’t be
opened because it was not downloaded from the Mac App Store.” In order to run the updater, please
refer to the steps in this Apple support article:
https://support.apple.com/en-us/HT202491
.
MIDI Implementation
Program Change Messages
By default, the Ventris responds to Program Change messages as shown in this table:
Parameter
Message Type
Data Value
Enable Preset 1
Program Change
000
Enable Preset 2
Program Change
001
Enable Preset 3
Program Change
002
Enable Preset 4
Program Change
003
Enable Preset 5
Program Change
004
Enable Preset 6
Program Change
005
Enable Preset 7
Program Change
006
Enable Preset 8
Program Change
007
Enable Preset 9 to 128
Program Change
008 to 127
To bypass the Ventris using Program Change messages, just set up one of the 128 presets with the
effect bypassed, and recall that preset when you need to bypass the Ventris.
Continuous Control Messages
Many parameters can be controlled via MIDI. A complete listing is too large to include in this manual.
Note, the Ventris MIDI Implementation document has not yet been published.
Please email
regarding any questions about the Ventris Dual Reverb’s MIDI
implementation.
Custom CC Mapping
The default MIDI map provides control over parameters using specific Continuous Controller
messages (described in the Ventris MIDI Implementation document available on the Source Audio
website). It is possible, however, to override the default map and create a custom mapping. There
are several important things to note when setting up a custom MIDI CC mapping:
•
Custom MIDI CC mappings are global, meaning they are not unique per preset. The CC
mapping will apply in all situations, regardless of which preset is active.