SA262
Ventris Dual Reverb Owner’s Manual
42
4.
After setting Hot Hand range of motion, click the O
N
/O
FF
F
OOTSWITCH
once. The calibration is
now complete, and the C
ONTROL
L
ED
will blink faster (about 2 blinks per second). Now, it is
time to map the Hot Hand to the effect parameters.
5.
Move the knobs and Neuro parameters (Neuro parameters are only accessible when
connected to the Neuro Mobile App or Neuro Desktop Editor) you wish to control with the
Hot Hand to their minimum desired position and then click the O
N
/O
FF
F
OOTSWITCH
. The
C
ONTROL
L
ED
will now blink even faster (about 4 blinks per second). Note that you may
control one or more knobs with the Hot Hand, up to four total knobs.
6.
Move the knobs and Neuro parameters you wish to control with the Hot Hand to the
maximum desired position and then click the O
N
/O
FF
F
OOTSWITCH
. The C
ONTROL
L
ED
will now
be lit solid red.
7.
After setting the minimum and maximum knob positions, the parameter mapping is
complete.
Reset Expression Control Mapping
To clear the expression control mapping (Expression or Hot Hand), first press the C
ONTROL
I
NPUT
B
UTTON
to turn OFF control mode. The C
ONTROL
L
ED
should be off. Then, press and hold the C
ONTROL
I
NPUT
B
UTTON
until the C
ONTROL
L
ED
blinks 3 times. This clears all expression or Hot Hand mapping and
resets external control back to the default Input Volume Control.