Source Audio Ventris Dual Reverb, User Manual, Page: 48 / 60

SA262 Ventris Dual Reverb Owner’s Manual 48
between the dry signal and the first reverb reflections. Note: you must tap the switch more
that two times in succession to change the Pre-Delay time.
•
Modulation Tap Tempo – Tap the Option footswitch to set the rate of the pitch modulation
in the wet signal.
•
Tremolo Tap Tempo – Tap the Option switch to set the time of the tremolo when using the
Modverb Engine.
•
Pre-Delay + Tremolo Tap Tempo – Simultaneously sets the speed of the tremolo pulse and
the reverb Pre-Delay time of the Modverb engine.
•
Reverb Hold Latching – Sustains the reverb trail with a single push and release of the Option
switch. Tap the Option switch again to release the Reverb Hold function and let the reverb
trail decay.
•
Pre-Delay Hold Latching – Sustain the Pre-Delay with a single push and release of the Option
switch. Tap the Option switch again to release the Pre-Delay Hold function
•
Swap Engine Latching – Tap the Option switch and move from Reverb A to Reverb B. Tap
again to go back to Reverb A.
•
Add Engine Latching – Tap the Option switch to add Reverb B to Reverb A (A+B Mode). Tap
again to return to only Reverb A.
•
Pitch Drop Latching – Shimmer Only – While using the Shimmer engine, a single push and
release of the Option switch sustains the reverb trail and engages the Pitch Drop function,
creating a dive-
bomb effect with the Shimmer’s pitch interval. Tap the Option switch again to
release the Pitch Drop function and let the reverb trail decay.
•
Pitch Rise Latching – Shimmer Only – While using the Shimmer engine, a single push and
release of the Option switch sustains the reverb trail and engages the Pitch Rise function,
creating gradual rise in the Shimmer engine’s pitch interval. Tap the Option switch again to
release the Pitch Rise function and let the reverb trail decay.
Option Press and Hold Dropdown Menu Choices
All of the following functions are accessible by pressing and holding the OPTION footswitch. The
Press and Hold action is also known as
“Momentary Switch” actio n, which engages the assigned
function only as long as the OPTION footswitch is held down. ( Note: The Press and Hold action is
available to only the OPTION switch, it is not possible to assign this action to an external switch )
•
Reverb Hold – Sustains the reverb trail while holding down the Option switch. While
sustaining the trail of Reverb A, Reverb B will be applied to the dry signal. This allows you to
play a reverb effected lead line on top of Reverb A’s sustained trail.
•
Pre-Delay Hold - Sustain the Pre-Delay.
•
Pre-Delay Build – Sustains and recirculates the Pre-Delay creating an intensifying effect
known as self-oscillation.
•
Pitch-Drop – Shimmer Only – While using the Shimmer engine, holding down the Option
switch sustains the reverb trail and engages the Pitch Drop function, creating a dive-bomb
effect with the Shimmer’s pitch interval.
•
Pitch-Rise – Shimmer Only – While using the Shimmer engine, holding down the Option
switch sustains the reverb trail and engages Pitch-Rise function, creating gradual rise in the
Shimmer engine’s pitch interval .