SA262
Ventris Dual Reverb Owner’s Manual
35
Stereo In, Dependent Stereo Out (4)
This mode should be your default selection for Stereo In, Stereo Out applications. Most effective
stereo reverb processing is performed with information from both input channels, so the modes in
this section should not be considered as completely independent audio channels. If you are sure you
want channel independence, seek the configurations with “independent” stereo signal processing.
Toggle Switch = Reverb A Toggle Switch = Reverb B
Toggle = Reverb A+B, Dual Parallel
Toggle = Reverb A+B, Dual Cascade
Reverb
A
1
1
2
2
Analog Dry Path
Analog Dry Path
Reverb
B
1
1
2
2
Analog Dry Path
Analog Dry Path
1
1
2
2
Analog Dry Path
Analog Dry Path
Reverb
B
Reverb
A
•
Mix Knob = Analog Dry Level
•
Control 1 knob = Reverb A level
•
Control 2 knob = Reverb B level
Reverb
B
Reverb
A
1
2
1
2
Analog Dry Path
Analog Dry Path
Digital Dry Path
Digital Dry Path
Digital Dry Path
Digital Dry Path
•
Mix Knob = Analog Dry Level
•
Control 1 knob = Reverb A/digital dry mix
•
Control 2 knob = Reverb B/digital dry mix