SoundCraft Vi1, User Manual

Page: 83 / 217

Soundcraft Vi1™ User Guide Issue 0610 Page 8 - 3
Each channel select button shows the channel’s ‘short label’ name in the centre of the button, and the
channel’s number, corresponding to its position on the fixed layers A/B/C/D, in the bottom left corner.
In the case shown above, channel 11 is being chosen to be the assignment for Strip 4 on User Layer 5. As
soon as you select your channel, the select screen will automatically close and return to the Setup page,
and you will be able to see your assigned channel on the first strip of User layer 1, like this:
Assigning VCA Master Faders to Input strips
As well as choosing input channels to assign to fader strips on the User Layers, it is also possible to assign
VCA masters alongside the inputs. The 8 VCA Master faders are displayed in the channel select page by
touching the VCA tab on the top right of the screen:
Hint: It is also possible to leave the channel select screen open, without selecting an channel or VCA, and
use the Solo/Sel buttons on the fader panels below the desk to scroll to a different fader strip to the one
you started with, before selecting the required channel.