SoundCraft Vi1, User Manual

Page: 79 / 217

Soundcraft Vi1™ User Guide Issue 0810 Page 7 - 5
MASTER BAY PANEL ENCODERS
The master section has four panel-mounted encoders with LED rings: the TB/OSC Level Control encoder,
and the Solo Blend, Solo Trim & Phones Volume encoders. These are all dedicated to their respective
functions. A description of their functions is given in chapter 9 of this manual.
MASTER SECTION VST ENCODERS
The default setting for the Master VST encoders is as the output level controls for Master Outputs 1-16.
This can also be selected by pressing the [PAGE A] key on the Master Vistonics Mode Panel (see Figure
7-6). Pressing [PAGE B] will cause the Master VST encoders to be assigned as the output level controls for
Master Outputs 17-24.
The Master VST encoders can also be assigned to Master Output Expanded Functions (e.g. EQ, Dynamics,
etc.). When a Master Output {SOLO/SEL} key is touched, it opens the Processing Area in the Master VST
screen. If then a paticular touch-area is touched, the VST encoders are assigned to appropriate expanded
functions. These functions are all described in detail in chapter 5 of this manual.