SoundCraft Vi1, User Manual

Page: 130 / 217

Soundcraft Vi1™ User Guide Issue 0810 Page 14 - 6
SETTINGS
This page contains the general settings of the console.
POINT
The point at which the input meters measure the signals within the input channels can be globally set via
the {INP POINT} encoder. There are four options, described in Chapter 13, Meters.
ENABLE NEXT/LAST
The [NEXT] and [LAST] keys are duplicated near the front of the desk, above the [SOLO CLR] and [GANG]
keys. For safety these duplicated keys are normally not enabled, and have to be switched on via the {NO/
YES} key. Once the keys have been enabled this will be stored when the show is saved.
DATE & TIME
The current date and time are displayed, this information is also used to timestamp the console’s show
files when they are created and/or saved. The {SETUP} button allows the date and time to be edited, as
well as allowing a choice of different date formats and 12 or 24 hour time format.