SoundCraft Vi1, User Manual

Page: 48 / 217

Soundcraft Vi1™ User Guide 0810 Page 4 - 6
STEREO CONFIGURATION
Pairing of input channels
The available channels on the four fixed Layers A, B, C and D are displayed on the touch screen.
Pairing candidates are the unused left and right neighbours and the vertical neighbour on the adjacent
layer. Existing Pairings will be shown greyed out. It is not possible to pair channels between layers B & C.
HINT: Selecting an input channel [SOLO/SEL] and or changing input layers moves this page to the desired
channel without having to exit the page.
Pair An input Channel
* Enter the pairing page by pressing {PAIRING} in the Input Page, all possible pairing candidates
will be shown.
* Select the desired pairing candidate, all channel parameters will be copied to the paring can-
didate, links will be set. The meter overview in the Master screen shows the pairing information
using white rectangles around the paired meters.
* Leave the page with {EXIT} or {PAIRING}.
HINT: If you want to pair a channel with one that is already used in another pair, you must first release that
pairing.
Linked Parameters on Paired Channels
In general, most parameters are linked between the two paired channels. the following parameters, how-
ever, are not linked:
GAIN, TRIM, 48V, PHASE, DELAY, INPUT PATCH, DIRECT OUT PATCH, PAN